STANDARD CAMERA MOUNT
- The Standard Camera Mount mounts directly to any mast arm, luminary, or extrusion. It provides approximately 12” lift and is completely adjustable. Preassembled with stainless band and all necessary hardware. Mounts to most all OEM cameras.
RIGID CAMERA MOUNT
- The Rigid Camera Mount mounts directly to the Skybracket standard or cable clamp kit. It provides approximately 14” lift and is completely adjustable. Mounts to most all OEM cameras.
PENDANT CAMERA MOUNT
- The Pendant Camera Mount mounts directly to any Sky Bracket clamp kit. Assembly can be affixed to the arm, it’s upright, or any rigid pole. Mounts any camera with 1 1/2″ threaded connection.
ADJUSTABLE CAMERA MOUNT
- The Adjustable Camera Mount mounts directly to the Skybracket standard or cable clamp kit and is easily clamped to the end of the Skybracket aluminum extrusion. This allows the use of variable tube lengths as well as the ability to conceal wires within the Skybracket extrusion. Mounts to most all OEM cameras.
Camera Kit Features and Benefits:
- Designed without set screws, pipe threads, retainer rings, and screw lockbuckles to avoid assembly, installation, and maintenance problems.
- No set screws to overload casting and cause catastrophic failure. Our power grip clamps put aluminum castings in compression to avoid overloads at fasteners.
- All fasteners are equipped with locking devices.
- Saddle has a multi-tooth mounting surface to provide a positive grip on mast arm.
- Saddle and swivel can be separated to enable user-defined mounting methods and procedures.
- Swivel lock screws provide 200+ ft-lbs holding torque.
- All adjustments can be made with 1/2” & 9/16” box wrench.
- Components have built-in keys, stops, pilots, bosses, cradles, and keyways to assure proper assembly.
- Unique push-in, non-directional rope type seal permits installation at 0°F.
- Available in stainless steel hardware.
- Designed to reduce installation time.
- Power grip clamps provide unique braking and holding characteristics with minimum tube distortion.
- SB-PLToptional Adaptor
Plate available for
Burle type cameras
- SB-6RPLTOptional bracket available
for mounting Coho cameras
and other large
- SB-IPLTOptional lug for mounting
the MS SEDCO Intersector
and other single
stud mount cameras.
- CAMERA SWIVELDirect mount swivel for
extreme low profile
- MOUNTING ADAPTERAdapts flat backed/arm mount
camera systems to
round pole mounted units.